Hardware Vault - Home Page

CPU Socket:
Socket LGA775 for Intel® Celeron D® 3xx series, Intel® Pentium 4® 5xx/6xx series, P4EE up to 3.8+GHz
Support 533/800/1066 MHz front-side bus
Support Intel® EM64Tφ 64-bit Computing platform
Support Intel 05B or 05A Platform Compatibility Guide

Chipset:
NVIDIA nForce4 SLi Intel Edition (C19) + MCP04

System Memory:
Four 240-pin DDR2 SDRAM DIMM sockets for maximum 8GB system memory
Support 1.8v DDR2-400/533/667 DIMMs with dual channel architecture
Support single-sided or double-sided, non-ECC DIMMs with 256Mb/512Mb/1Gb devices

Expansion Slots:
Two PCI connectors compliant with PCI v2.3
Two PCI-Express (x1) connectors compliant with PCI Express 1.0a
Two PCI Express (x16) connectors compliant with PCI Express 1.0a to support SLi technology
One Express Card connector compliant with PCI Express 1.0a

IDE:
Two IDE interface (up to 2 IDE devices) with UDMA-33, ATA-66/100 support from embedded IDE controller

USB:
Ten USB connectors compliant with USB2.0 from embedded USB controller (4 connectors at rear panel)

S-ATA RAID:
Four S-ATA –2 ports with up to 300MB/s bandwidth from MCP04 with RAID 0,1 support with Hot-Plug support

1394a:
Two 1394a ports with up to 400Mbps bandwidth from onboard VT6307 1394a controller

LAN:
1Gb Ethernet from onboard Vitesse VSC8201RX Gigabit Ethernet PHY.

Audio:
Selectable 2, 6 or 8-CH audio from ALC880 Azalia compliant CODEC with 20-bit ADC and 24-bit DAC
Support Aux-In, CD-In, S/PDIF-in and S/PDIF-out
Optical & Coaxial S/PDIF-out available on rear panel
Support Jack detection for fool-proof audio device installation

I/O:
Onboard Winbond W83627THF(E) LPC bus I/O controller
Legacy peripheral interface for PS/2 keyboard & mouse, FDD, Parallel, Two Serial, Game and IrDA (v1.0 compliant)
Hardware Monitoring for fan speed monitoring, CPU/System temperature and ThermoStick temperature.
Intelligent fan speed control for CPU-fan (PWM) and Chassis-fan (DC) for quiet operation

BIOS:
4Mb Flash EEPROM with Award Plug&Play BIOS
Support ACPI S3 (Suspend To RAM) mode in ACPI compliant O/S
Support EZ Boot for fast bootable device selection
Support Magic Health for system hardware status report during system boot-up

Special Features:
Support KBPO (Keyboard Power ON) function
Support Wake-On-LAN by PME
Support USB resume in S3
Onboard Post-Port LED display
Support Asynchronous clocking mode between FSB and PCI/PCI-E

PowerBIOS for excellent overclocking features:
Programmable FSB and PCI Clock output frequency with 1MHz fine tuning
Support BIOS adjustable CPU multiplier, FSB clock, PCI-E x16 clock, DIMM frequency
Support BIOS adjustable CPU Core voltage, Chipset voltage, DIMM voltage settings

Powerful utilities for Windows:
USDM (Unified System Diagnostic Manager) for system hardware monitoring
Magic Flash for BIOS update without requiring DOS flash utility and bootable diskette
Magic Screen for personal bootup screen design

Form Factor:
305mm x 245mm x 40mm, ATX Size

Accessories
User’s manual
1 IDE cable & 1 FDD cables;
2 S-ATA data and power cables;
CD for drivers, utilities and bundle software

Audio connection:
For 2-channel mode; stereo Line-out (Lime), stereo Line-In (Light blue) and Mic-In (Pink)
For 6-channel mode; Front stereo-out (Lime), Rear stereo-out (Light blue), Center and Sub-woofer (Pink)
For 8-channel mode; stereo Line-In (Light blue), Mic-In (Pink), Front stereo-out (Lime), Rear stereo-out (Black), Center and Sub-woofer (Orange) and Side stereo-out (Gray)